How to Program a Lexus Garage Door Opener

If you own or have recently purchased a newer Lexus model, you have access to the Lexus HomeLink System. This system helps you with operating the garage door opener from your Lexus interface. The first step to using this technology is to learn how to program the Lexus garage door opener. At Lexus of Cherry Hill, we can help you do this at home! Simply use our service guide to learn how to program a Lexus garage door opener today! If you’re having issues or have any questions, contact our service center.

How to Program a Lexus Garage Door Opener for a Multi-Button Remote Control

  1. Park your vehicle outside the garage.
  2. Hold your original garage door remote one to three inches away from the in-vehicle HomeLink control buttons.
  3. Simultaneously press the button on your remote control unit and the button you want to use on your in-vehicle HomeLink system.
  4. Hold until the HomeLink indicator flashes repeatedly then changes to solid.
  5. Press the HomeLink button twice to activate.
  6. If the HomeLink button operates the garage door, you’re all set. If it doesn’t, and the HomeLink indicator flashes continuously, you have a “rolling code” system, and you will need to proceed to the next step:
  7. In your garage, find the “smart” or “learn” button on your garage door opener motor (should be on the back near the hanging antenna wire).
  8. Press and release the smart or learn button.
  9. Within the next 30 seconds, return to your vehicle and press the desired HomeLink button three times.

How to Program a Lexus Garage Door Opener for a Single Button Remote Control

  1. Park your vehicle outside the garage.
  2. Press and hold the desired HomeLink button. The indicator should start to flash slowly within 20 seconds. Continue to hold the button while performing the next step.
  3. Position the remote control one to three inches from the HomeLink control buttons.
  4. While continuing to hold down the HomeLink button, press the button on the remote until the HomeLink indicator begins to flash rapidly or turns solid.
  5. Release the remote button and press and hold the HomeLink button. If the indicator light is solid, then programming is complete. Press the HomeLink button twice to activate. You’re done! (If the indicator light continues to flash rapidly, you have a “rolling code” garage door system, and you will need to perform the following steps.)
  6. Find the “smart” or “learn” button on your garage door opener motor (should be on the back near the hanging antenna wire).
  7. Press and release the smart or learn button.
  8. Within the next 30 seconds, return to your vehicle and press the desired HomeLink button three times.

How to Erase the HomeLink Memory

In order to erase HomeLink memory, you’ll need to press the two outside HomeLink control buttons at the same time until you see the indicator lights change from solid to flashing. Once this is done, the HomeLink memory is erased.

Find More Tips from the Lexus of Cherry Hill Service Team!

If you have any questions on how to program your Lexus garage door opener, the service team at Lexus of Cherry Hill is more than happy to help. Contact our team and we can help you set up your HomeLink system, learn more service tips and tricks, how to trade in a financed car, who manufactures Lexus models, how to install a new car battery, to learn about Lexus Enform, and tell you about our service specials.

Saved Vehicles

SAVED VEHICLES

You don't have any saved vehicles!

Look for this link on your favorites:

Save

Once you've saved some vehicles, you can view them here at any time.

Contact Us

(856) 727-1111

Call Now

1230 Route 73 South • Mt. Laurel, NJ 08054

Get Directions

Today's Hours:

Open Today! Sales: 9am-5:30pm

Open Today! Service: 7:30am-5pm

Open Today! Parts: 7:30am-5pm

Lexus of Cherry Hill 39.92214, -74.95033.